POLYSHIELDSYSTEMSRequest a quotation
Basement, foundation or wall leaks

Problem guide · Concrete and structures

Basement, foundation or wall leaks

Vochtbelasting aan ondergrondse betonconstructies.

Check if your project fits ↗View solution

Probleem, oorzaak en gevolg

First understand what is going on.
Only then choose a system.

ZICHTBAAR SIGNAAL

What you can observe

Moisture, leakage or water pressure around the basement and foundation.

GEVOLG VOOR HET GEBOUW

Why timely assessment helps

De waterzijde en lekroute bepalen of herstel aan binnen- of buitenzijde verantwoord is.

TECHNISCHE RICHTING

What is being technically investigated

Record water load, concrete condition, bilges, joints, penetrations and accessibility before system selection.

Possible causes

The visible complaint is not always the real cause.

These causes constitute a targeted checklist, not a remote diagnosis.

01

Cracking movement, water pressure or deterioration of reinforcement

02

Defective joints, penetrations or connections

03

Protective layer is not suitable for traffic, water or chemical loads

Per projecte controle

Three components determine the correct next step.

The Problem Guide provides direction, but does not make an unfounded material claim. For a final system choice, we check the situation on location or based on sufficient project information.

  1. 01Cause, movement and moisture or water load
  2. 02Concrete condition, reinforcement, joints and penetrations
  3. 03Bereikbaarheid en constructieve context

Value of a complete approach

Don't just recover.
Making the project manageable.

  • Investigate cause and water route before finishing
  • Link recovery and protection within one technical scope
  • Specify load, anti-slip and maintenance in advance

Beoordeling in de praktijk

Wat vraagt kelder, fundering of wand lekt in de praktijk?

De zichtbare schade is het vertrekpunt, niet automatisch de oorzaak. Daarom verbinden we bij kelder, fundering of wand lekt de waarneming aan de ondergrond, de kritieke details en het werkelijke gebruik van het gebouw.

Wanneer dit meestal past

Cracking movement, water pressure or deterioration of reinforcement

Investigate cause and water route before finishing

Defective joints, penetrations or connections

Link recovery and protection within one technical scope

Protective layer is not suitable for traffic, water or chemical loads

Specify load, anti-slip and maintenance in advance

Wat we eerst willen weten

  • Cause, movement and moisture or water load
  • Concrete condition, reinforcement, joints and penetrations
  • Bereikbaarheid en constructieve context

Wanneer we een andere aanpak adviseren

Constructieve veiligheid en stabiliteit worden door een bevoegde constructeur beoordeeld voordat een beschermingssysteem wordt gekozen.

In-depth and evidence

Van herkenbaar probleem naar duidelijke projectinformatie.

SOLUTION

Bekijk de passende mogelijke oplossing

Ontdek werkzaamheden, opbouw, voordelen en controle voor het betreffende project.

View solution →
PROJECT TOOL

Start construction screening

Only record the data necessary for the next step.

Launch tool →

Frequently asked questions

Answered briefly and technically honestly.

Can PolyShield immediately recommend a system?+

Eerst worden oorzaak, ondergrond, omvang en projectsituatie gecontroleerd. Daarna kan een passende mogelijke oplossing worden onderbouwd.

What information helps with an initial assessment?+

Project address, general scope, some overview and detailed photos, building use and desired planning are usually sufficient to get started.

Do I have to re-enter all the data?+

No. Choices from the Problem Guide are automatically taken to the next tool and project request.

Short route to implementation

Check with two questions whether the project fits.

Deze korte controle voorkomt een onnodig lange aanvraag. Uw probleem wordt vooraf geselecteerd en bekende gegevens gaan automatisch mee.

Controleer of het project past →View the suitable solution →Start construction screening →