POLYSHIELDSYSTEMSProject bespreken
Tegels of afwerking komen los

Problem guide · Balcony and terrace

Tegels of afwerking komen los

Loose tiles, cracks or weathered joints.

Check if your project fits View solution

Probleem, oorzaak en gevolg

First understand what is going on.
Only then choose a system.

ZICHTBAAR SIGNAAL

What you can observe

The visible finish is failing, but the condition of the underlying waterproofing is unknown.

GEVOLG VOOR HET GEBOUW

Why timely assessment helps

Alleen tegels vervangen lost een onderliggend vocht- of aansluitprobleem mogelijk niet op.

TECHNISCHE RICHTING

What is being technically investigated

Investigate tile build-up, residual moisture and detailing before choosing a new finish or membrane route.

Possible causes

The visible complaint is not always the real cause.

These causes constitute a targeted checklist, not a remote diagnosis.

01

Defective connections around sill, facade or edge

02

Onvoldoende afschot of verstoorde afvoer

03

Scheuren of verouderde waterdichting onder de afwerking

Per projecte controle

Three components determine the correct next step.

The Problem Guide provides direction, but does not make an unfounded material claim. For a final system choice, we check the situation on location or based on sufficient project information.

  1. 01Slope, drain, sills and connections
  2. 02Cracks, moisture and condition of the existing finish
  3. 03Gewenste eindafwerking en gebruiksbelasting

Value of a complete approach

Don't just recover.
Making the project manageable.

  • Waterroute en zichtbare schade van elkaar onderscheiden
  • Design details and main plane as one system scope
  • Fasering en gebruikersoverlast vooraf beheersen

Beoordeling in de praktijk

Wat vraagt tegels of afwerking komen los in de praktijk?

De zichtbare schade is het vertrekpunt, niet automatisch de oorzaak. Daarom verbinden we bij tegels of afwerking komen los de waarneming aan de ondergrond, de kritieke details en het werkelijke gebruik van het gebouw.

Wanneer dit meestal past

Defective connections around sill, facade or edge

Waterroute en zichtbare schade van elkaar onderscheiden

Onvoldoende afschot of verstoorde afvoer

Design details and main plane as one system scope

Scheuren of verouderde waterdichting onder de afwerking

Fasering en gebruikersoverlast vooraf beheersen

Wat we eerst willen weten

  • Slope, drain, sills and connections
  • Cracks, moisture and condition of the existing finish
  • Gewenste eindafwerking en gebruiksbelasting

Wanneer we een andere aanpak adviseren

Structural damage, unsafe railings and severely deteriorated concrete are beyond the scope of a solely waterproof coating solution.

In-depth and evidence

Van herkenbaar probleem naar duidelijke projectinformatie.

PROJECT FILE

View a relevant version

See initial situation, preparation, system structure and results.

Open project →
SOLUTION

Bekijk de passende mogelijke oplossing

Ontdek werkzaamheden, opbouw, voordelen en controle voor het betreffende project.

View solution →
PROJECT TOOL

Start korte screening

Only record the data necessary for the next step.

Launch tool →

Frequently asked questions

Answered briefly and technically honestly.

Can PolyShield immediately recommend a system?+

Eerst worden oorzaak, ondergrond, omvang en projectsituatie gecontroleerd. Daarna kan een passende mogelijke oplossing worden onderbouwd.

What information helps with an initial assessment?+

Project address, general scope, some overview and detailed photos, building use and desired planning are usually sufficient to get started.

Do I have to re-enter all the data?+

No. Choices from the Problem Guide are automatically taken to the next tool and project request.

Short route to implementation

Check with two questions whether the project fits.

Deze korte controle voorkomt een onnodig lange aanvraag. Uw probleem wordt vooraf geselecteerd en bekende gegevens gaan automatisch mee.

Controleer of het project past View the suitable solution Start korte screening