Roofs
Elastic waterproofing system for metal
Combined corrosion treatment and elastic waterproofing for metal roof sheets, overlaps, fastenings and gutters.
Core systemExposed
Deze pagina beschrijft de techniek. Concrete dakuitvoering en aanvragen staan op PolyShield Dakcoating.
PolyShield performs this
Elastic waterproofing system for metal
Elastic waterproofing system for metal as a complete waterproofing route for metal industrial halls and gutters.
- Inspect roof structure, moisture and details
- Cleaning and repairing weak areas
- Apply primer and detail reinforcement
- Waterproof membrane delivered in a controlled manner
From damage picture to solution
Problem, cause and effect first visible.
- UV and weather loads
- Movement of seams and connections
- Overdue maintenance or previous emergency repairs
Moisture can damage insulation, interior, installations and business processes.
Een renovatie afgestemd op het gebouw van ondergrond, details, primer en doorlopend membraan.
Business benefits
The value is not just in the new layer.
Lifespan
Maintain a technically suitable roof structure and postpone replacement.
Continuity
Organize renovation per work area around the use of the building.
Risk management
Include critical details before consequential damage occurs.
Maintenance
Een inspecteerbare en lokaal herstelbare aanpak creëren.
RISK OF DELAY
Delay can allow local defects to progress to wet insulation, larger repair zones and damage under the roof.
First have the size, cause, accessibility and desired planning assessed. We then compare repair, renovation and, where necessary, replacement without selling a standard solution in advance.
Have project assessed →System construction
A complete structure, no loose coating.
De visual maakt het functionele principe inzichtelijk. Exacte producten, laagdiktes en verbruiken volgen uit ondergrondonderzoek en de projectspecificatie.
- 01Prepared metal
Degreased, desalted and free from loose corrosion
- 02Anti-corrosion primer
Tailored to metal and load
- 03Detail seal
Overlaps, screws, edges and gutters
- 04Elastic membrane
Waterproof and weatherproof final layer
System profile
What this direction is rated for.
- Metal industrial halls
- Gutters
- Cut edge corrosion
- Facade and roof transitions
- Corrosion-oriented
- Elastic details
- Seamless
- Airless possible
- Reflective variant
- Metal
Application boundaries
Where this system fits primarily, conditionally or non-standard.
The classification helps with the initial selection. Substrate, load, detailing and current system documentation remain decisive.
Other building parts only after additional validation.
- Wet or unstable surface
- Unknown layers without test adhesion
- Structural defect without repair
- Undocumented product combination
Beoordeling in de praktijk
Wanneer metaal & goten kansrijk is
Combined corrosion treatment and elastic waterproofing for metal roof sheets, overlaps, fastenings and gutters.
Wanneer dit meestal past
Metal industrial halls
De ondergrond en detaillering moeten deze systeemroute aantoonbaar toelaten.
Gutters
De ondergrond en detaillering moeten deze systeemroute aantoonbaar toelaten.
Cut edge corrosion
De ondergrond en detaillering moeten deze systeemroute aantoonbaar toelaten.
Wat we eerst willen weten
- Residual wall thickness
- Corrosion and salts
- Existing coating
- Confirmations
- Distortion and movement
Wanneer we een andere aanpak adviseren
Geen verzwakt metaal conserveren zonder herstel Condensoorzaak apart beoordelen Voorbehandelingsgraad vastleggen
01 / Inspect
We want to know this first.
- Residual wall thickness
- Corrosion and salts
- Existing coating
- Confirmations
- Distortion and movement
02 / Limit
When we don't execute immediately.
- Do not preserve weakened metal without repair
- Assess the cause of condensation separately
- Determine the degree of pretreatment
03 / Substantiate
Which must be demonstrable.
- Adhesion test on existing layers
- Record preparation and layer thickness
- Determine corrosion class per project
Technical proof
Performance is system and structure specific.
The statuses below are deliberately reserved. A proof is only shown as proven after the current document, the system variant and the intended use have been checked.
ETA/EAD
An ETA applies to the described system kit and its intended use. Document number and current system variant are checked before publication.
CE and declaration of performance
CE and DoP describe declared product performance; they are not a blanket endorsement of every roofing project.
BROOF classification
Only claimable for the exact tested roof structure, substrate, layer thickness and the stated test suffix, for example BROOF(t1).
Waterproofing
Test performance and application conditions must correspond to the selected membrane variant and project structure.
Crack bridging and movement
Class, temperature and layer thickness are taken from the current technical documentation.
VOC and environmental documentation
VOC, EPD and other environmental claims are only published with a current, traceable source.
Van mogelijke oplossing naar aanbieding
Four pieces of information that really determine the quotation.
Material, condition, moisture, adhesion and existing layers.
Edges, bilges, drains, penetrations, seams and connections.
Water, UV, movement, traffic, use and operating conditions.
Accessibility, phasing, safety, planning and weather window.
Frequently asked questions
Technical clarity before application.
Is this system directly suitable for every surface mentioned?
No. The substrate must fall within the approved system scope and is checked for cohesion, moisture, contamination, movement and adhesion. The correct preparation and primer are then recorded.
Is the layer structure shown always the same?
The functions remain recognizable, but primer, reinforcement, number of layers and consumption may differ per substrate and load. The final structure is stated in the project specification.
Can the system be installed over existing waterproofing?
Only when material, mounting and condition are known and a compatible structure can be demonstrated. For unknown membranes or coatings, we first carry out identification and test adhesion.
What lifespan or warranty applies?
Technical ratings and expected useful lives are for specifically rated systems. The project guarantee also depends on the surface, scope, implementation, maintenance and written agreements.
What is the first step?
A project screening and inspection. We record construction, surface, damage picture, water load, details, accessibility and desired planning.
Related expertise
From waterproofing system to application, evidence and project route.
These next steps are linked to application, substrate, risk and decision phase. This way you navigate from general information to technology, evidence and a useful project route.
Technology
Centrale gids polyurea dakrenovatie
Van dakonderzoek en systeemopbouw tot vergelijking, grenzen, projectinformatie en zakelijke vervolgstap.
View this route →ApplicationRepairing metal commercial roofs
Overlappen, bevestigingen, corrosie en goten als één renovatieaanpak behandelen.
View this route →ApplicationMetalen bedrijfsdak Rotterdam
Corrosie, naden en coating als één renovatieaanpak.
View this route →HulpmiddelPolyShield Systeemkeuzehulp
Vertaal bouwdeel, ondergrond, prioriteit en planning naar een duidelijke eerste mogelijke oplossing.
View this route →TechnologyPremium cold applied 2K polyurea
Complete quick waterproofing route with primer, details and UV resistant membrane.
View this route →KnowledgeWhy use primer for roof coating?
Primer selection depends on the surface, preparation, moisture and adhesion route.
View this route →